HEIDENHAIN TNC 620 User Manual page 393

HEROS functions | Window manager
Creating a printer
To create a new printer:
Enter the printer name in the name dialog
Select DATA RECS.
The control creates a new printer.
Press the CHANGE soft key
The control opens the Change the printer dialog.
For each printer, the following properties can be set:
Setting
Name of the printer
Connection
Timeout
Standard printer
Settings for printing of
text
Orientation
Expert options
Requirements made on the connected printer
The connected printer must be PostScript-enabled.
The control can communicate only with printers that understand
PostScript emulation such as KPDL3. Some printers enable setting
the PostScript emulation in the printer menu.
To change the printer settings:
Select the printer menu
Select printing settings
Select KPDL for emulation
Confirm if required
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Meaning
Customizes the printer name
Selects the connection
USB – Assign the USB connection here. The control automatically displays the
name.
Network – Enter the network name or the IP address of the printer here. In addition,
specify the port of the network printer here (default: 9100)
Printer %1 not connected
Delays the printing process
The control delays the printing process by the pre-set number of seconds after the last
change has been made to the file to be printed in PRINTER:.
Use this setting if the file to be printed is populated with FN functions, e.g. when
probing.
Selects the default printer
When creating the first printer, this setting is automatically entered.
These settings are applicable when printing text documents:
Paper size
Number of copies
Job name
Font size
Header
Print options (black and white, color, duplex)
Portrait or landscape for all printable files
Available only to authorized specialists
10
393