Setup | Moving the machine axes
5.2
Moving the machine axes
Note
Refer to your machine manual.
Movement of the axes via the axis direction keys can vary
depending on the machine.
Moving the axis with the axis direction keys
Operating mode: Press the Manual operation key
Press the axis-direction key and hold it down as
long as you wish the axis to move
Alternatively, move the axis continuously: Press
and hold the axis-direction key and press the
NC Start key
To stop: Press the NC Stop key
You can move several axes at a time with these two methods. The
control then shows the feed rate. You can change the feed rate at
which the axes are moved with the F soft key.
Further information: "Spindle speed S, feed rate F and
miscellaneous function M", Page 183
If a moving task is active on the machine, the control displays the
control in operation symbol.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
5
171