HEIDENHAIN TNC 620 User Manual page 438

10
Create new user
To create a new user, proceed as follows:
Press the Create new user soft key
The control opens a window for creating a user.
Enter the user name
Enter the password for the user
The user must change the password when logging in for
the first time.
Further information: "Login to user administration",
Page 452
Create a user description, if desired
Press the Add role soft key
In the selection window, select the roles corresponding to the
user
Further information: "Definition of roles", Page 443
Press the Add soft key
Two additional soft keys are available in the menu:
Add external login
Adds Remote.HEROS.Admin in place of
HEROS.Admin, for example.
This role is only enabled for remote logon to the
system.
Add local login
Adds Local.HEROS.Adminin place of HEROS.Admin,
for example.
This role is only enabled for local logon at the control's
screen.
Press the CLOSE soft key
The control closes the window for creating a user.
Press the OK soft key
Press the APPLY soft key
The control adopts the changes.
Press the END soft key
The control closes the user administration.
If you have not restarted your control after configuring
the database, the control prompts you to restart for the
changes to take effect.
Further information: "Configuring the user
administration", Page 428
438
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
HEROS functions | User administration