Modes Of Operation; Manual Operation And El. Handwheel; Positioning With Manual Data Input - HEIDENHAIN TNC 620 User Manual

Fundamentals | Modes of operation
3.3

Modes of operation

Manual Operation and El. Handwheel

In the Manual operation mode of operation, you can set up
the machine. You can position the machine axes manually or
incrementally, and you can set presets.
If option 8 is active, you can tilt the working plane.
The Electronic handwheel operating mode supports manual
traverse of machine axes with the HR electronic handwheel.
Soft keys for selecting the screen layout
Soft key Window
Positions
Left: positions, right: status display
Left: positions, right: workpiece
(option 20)

Positioning with Manual Data Input

This mode of operation is used for programming simple traversing
movements, such as for face milling or pre-positioning.
Soft keys for selecting the screen layout
Soft key Window
NC program
Left: NC program, right: status display
Left: NC program, right: workpiece
(option 20)
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
3
65