HEIDENHAIN TNC 620 User Manual page 441

HEROS functions | User administration
Access rights
The user administration is based on the Unix rights management.
Access to the control is controlled by means of rights.
The user administration differentiates between the following terms:
User
Roles
Rights
User
A user can be pre-defined in the control or he can be defined by the
end user.
The user administration offers the following types of users:
Function users predefined by HEIDENHAIN
Further information: "HEIDENHAIN function users", Page 442
Function users defined by the machine tool builder
Self-defined users
A user contains all the roles that have been assigned to him.
Your machine tool builder defines function users who are
required for specific tasks such as machine maintenance.
Depending on the task assigned, you can use one of the
pre-defined function users or you have to create a new
user.
The access rights of HEIDENHAIN function users are
already pre-defined in the control's factory default setting.
Roles
Roles consist of a combination of rights that cover certain functions
provided by the control.
Operating system roles:
NC operator roles:
Machine tool builder (PLC) roles:
All of these roles are pre-defined in the control.
You can assign more than one role to a user.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
10
441