HEIDENHAIN TNC 620 User Manual page 72

3
Overview
The control displays the Overview status form after startup if
you selected the PROGRAM + STATUS (or POSITION STATUS)
screen layout. The overview form contains a summary of the most
important status information, which you can also find on the various
detail forms.
Soft key Meaning
Position display
Possible additional information following the axis
designations:
Spindle position
Depends on the
spindleDisplay machine parameter (no. 100807)
Tool information
Active M functions
Active coordinate transformations
Active subprogram
Active program-section repeat
NC-program called with PGM CALL
Current machining time
Name and path of the active main program
General program information (PGM tab)
Soft key Meaning
No direct Name and path of the active main program
selection
possible
Actual/nominal value counters
Circle center CC (pole)
Dwell time counter
Current machining time
Current time
Called NC programs
72
(D): PARAXMODE DISPLAY function active
(M): PARAXMODE MOVE function active
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Fundamentals | Status displays