HEIDENHAIN TNC 620 User Manual page 446

10
Machine tool builder (PLC) roles:
Role
PLC.ConfigureUser
PLC.ServiceRead
Refer to your machine manual.
The machine tool builder can adapt the PLC roles.
When the Machine tool builder (PLC) roles: are
adapted by the machine tool builder, the following
contents may change:
The names of the roles
The number of roles
The functionality of the roles
Privileges
The table below lists all of the individual rights.
Rights:
HEROS role name
HEROS.Printer
HEROS.PrinterAdmin
HEROS.ReadLogs
NC.OPModeManual
NC.OPModeMDi
NC.OpModeProgramRun
NC.SetupProgramRun
NC.ScheduleProgramRun
NC.EditNCProgram
NC.EditToolTable
NC.EditPocketTable
NC.EditPresetTable
NC.EditPalletTable
NC.SetupDrive
NC.ApproveFsAxis
NC.EditNCProgramAdv
446
Privileges
HEROS role name
This roles grants the rights on code number 123.
NC.ConfigUserAdv
NC.SetupDrive
This role allows read-only access during servicing.
This role can be used to display various types of diagnostic information
NC.Data.AccessServiceRead
Description
Data output to network printers
Configuration of network printers
Currently no function
Operating the machine in the Manual Operation and Electronic handwheel
operating modes.
Working in the Positioning w/ Manual Data Input operating mode.
Execution of NC programs in the Program Run Full Sequence or Program run,
single block operating mode.
Probing in the Manual Operation and Electronic handwheel operating modes
Using the AFC and ACC functions.
Programming a scheduled NC program start
Editing NC programs
Editing the tool table
Editing the pocket table
Editing the preset table
Editing pallet tables
Adjustment of drives by the end user
Confirming test position of safe axes
Additional NC functions
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
HEROS functions | User administration
UNIX group Basic ID number
NCConfigUserAdv
NCSetupDrv
NCDAServiceRead
316
315
324