HEIDENHAIN TNC 620 User Manual page 465

HEROS functions | OPC UA NC Server (options 56 to 61)
Application development
OPC UA is a manufacturer/platform-independent, open
communication standard. For this reason, an OPC UA client SDK is
not included in the OPC UA NC Server.
HEIDENHAIN information model
A separate Companion Specification document is available
that describes the information model supported by the
OPC UA NC Server.
OPC UA NC Server information model
The specification for the OPC UA NC Server is described
in the Information Model interface documentation. This
document is available only in English.
ID: 1309365-xx
The OPC UA NC Server Information Model interface
documentation is provided at:
HEIDENHAIN homepage
Technical notes
In order to establish a connection, the OPC UA client must support
the security policy and authentication method used by the
OPC UA NC Server.
The OPC UA NC Server has the following end point configuration:
Security Mode: SignAndEncrypt
Algorithm: Basic256Sha256
User Authentication: X509 certificates
The end point configuration including the URL, which
depends on the server host name, is displayed on the last
page of the Connection Assistant.
The so-called user certificate can be assigned to a user in
user administration.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
10
465