HEIDENHAIN TNC 620 User Manual page 322

8
Selecting a pallet table
To select a pallet table or create a new pallet table:
Switch to the Programming operating mode or a
program run operating mode
Press the PGM MGT key
If no pallet tables are shown:
Press the SELECT TYPE soft key
Press the SHOW ALL soft key
Select a pallet table with the arrow keys, or enter a
name for a new pallet table (.p)
Press the ENT key
You can select either a list view or form view using the
Screen Layout key.
Inserting or deleting columns
This function is not enabled until the code number
555343 is entered.
Depending on the configuration, a newly created pallet table may not
contain all columns. For tool-oriented machining, for example, you
need columns that you have to insert first.
To insert a column in an empty table:
Open the pallet table
Press the MORE FUNCTIONS soft key
Press the EDIT FORMAT soft key
The control opens a pop-up window displaying
the available columns
Using the arrow keys, select the desired column.
Press the INSERT COLUMN soft key
Press the ENT key
You can remove the column with the DELETE COLUMN soft key.
322
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Pallets | Pallet management (option number 22)