HEIDENHAIN TNC 620 User Manual page 434

10
Connection to a Windows domain
Prerequisites
Before you can use the Connection to Windows domain function,
the following requirements must be met:
User administration is active
The useradmin user has been configured
There is a Windows Active Domain Controller in the network
You have access to the password of the domain controller
You have access to the user interface of the domain controller or
you are supported by an IT administrator
The domain controller is accessible in the network
434
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
HEROS functions | User administration