New Functions 81760X-16 - HEIDENHAIN TNC 620 User Manual

1

New functions 81760x-16

Overview of new and modified software functions
Further information about the previous software versions
is presented in the Overview of New and Modified
Software Functions documentation. Please contact
HEIDENHAIN if you need this documentation.
ID: 1322094-xx
HEIDENHAIN has simplified the version schema, starting
with NC software version 16:
The publication period determines the
version number.
All control models of a publication period have the
same version number.
The version number of the programming stations
corresponds to the version number of the
NC software.
Further information: User's Manual for Klartext Programming or
ISO Programming
Software option 152 CAD Model Optimizer was added for CAD-
Viewer. With the 3D mesh function, you generate STL files from
3-D models. This allows you to repair defective files of fixtures
and tool holders, for example, or to position STL files generated
from the simulation for another machining operation.
When programming circular paths with C, CR and CT, the LIN_
syntax element is now available in order to superimpose a linear
motion over the circular motion of an axis. This allows you to
program a helix in a simple way.
In ISO programming, you can define a third axis using the free
syntax input in conjunction with the G02, G03, and G05 functions.
With the TRANS ROTATION function, you can rotate contours
or positions around a rotation angle. The TRANS DATUM RESET
function allows you to reset the rotation. The NC functions serve
as an alternative to Cycle 10 ROTATION.
34
Basic information | Control model, software and features
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022