HEIDENHAIN TNC 620 User Manual page 58

Setup, testing and running nc programs

Hide thumbs Also See for TNC 620:

Table of Contents

Virus scanners

Virus scanners can negatively affect the behavior of an NC control.

Possible negative effects are feed rate drops or system crashes,

for example. Such negative effects are unacceptable in numerical

controls for machine tools. HEIDENHAIN therefore does not offer a

virus scanner for the control and does not recommend using a virus

The control provides the following alternatives:

Locking from external access

Monitoring of TCP and UDP ports

If properly configured, these options ensure extremely effective

protection for the data of the control.

If you insist on using a virus scanner, you must operate the control

in a protected network (with a gateway and a virus scanner). The

subsequent installation of a virus scanner is not possible.

HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022

Fundamentals | The TNC 620

Tnc 620 e Tnc 620 programming station