Fundamentals | Accessories: HEIDENHAIN 3-D touch probes and electronic handwheels
HR electronic handwheels
Electronic handwheels facilitate manual traversing of the axis slides.
A wide range of traverses per handwheel revolution is available. The
portable HR 510, HR 520 and HR 550FS handwheels are avaible
from HEIDENHAIN in addition to the HR 130 and HR 150 panel-
mounted handwheels.
Further information: "Traversing with electronic handwheels",
Page 173
Several electronic handwheels can also be connected
simultaneously and used alternatively on controls with
the (HSCI: HEIDENHAIN Serial Controller Interface) serial
interface for control components.
Configuration is performed via the machine tool builder.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
3
125