HEIDENHAIN TNC 620 User Manual page 436

10
If not all of the required roles have been created in the
domain as groups, the control issues a warning.
If the control issues a warning, proceed in one of the
two following ways:
Press the Add role definition soft key
You can enter the roles directly into the domain in
this case.
With this function, you can export the roles to a file
in .ldif format.
All of the required roles have been created in the domain as
groups.
Creating groups
There are the following ways to create groups corresponding to the
different roles:
Automatically when entering the Windows domain by specifying
a user with administrator rights
By importing an import file in .ldif format to the Windows server
The Windows administrator must add the users manually to the
roles (security groups) on the domain controller.
Two suggestions describing how the groups can be structured by
the Windows administrator are given by below.
Example 1
The user is a direct or indirect member of the respective group:
436
Select the Add function
Press Export
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
HEROS functions | User administration