HEIDENHAIN TNC 620 User Manual page 330

8
8.4 Batch Process Manager (option 154)
Application
Refer to your machine manual.
Your machine tool builder configures and enables the
Batch Process Manager function.
Batch Process Manager enables you to plan production orders on a
machine tool.
You save the planned NC programs in a job list. You use Batch
Process Manager to open the job list.
The following information is displayed:
Whether the NC program is free of errors
Run time of the NC programs
Availability of the tools
Times at which manual interventions at the machine are
necessary
The tool usage test function has to be enabled and
switched on to ensure you get all information!
Further information: "Tool usage test", Page 145
Fundamentals
Batch Process Manager is available in the following operating
modes:
Programming
Program run, single block
Program run, full sequence
In the Programming operating mode, you can create and edit the job
list.
The job list will be processed in the Program run, single block
and Program run, full sequence operating modes. Changes are
possible only to a limited extent.
330
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Pallets | Batch Process Manager (option 154)