HEIDENHAIN TNC 620 User Manual page 491

Tables and overviews | Machine-specific user parameters
Depiction of the parameters
The icon at the beginning of each line in the parameter tree shows
additional information about this line. The icons have the following
meanings:
Branch exists but is closed
Branch is open
Empty object, cannot be opened
Initialized machine parameter
Uninitialized (optional) machine parameter
Can be read but not edited
Can neither be read nor edited
The folder icon indicates the object type:
Key (group name)
List
Entity (parameter object)
The icons of parameters and objects that are not yet
active appear dimmed. These can be activated with the
MORE FUNCTIONS and INSERT soft keys.
Changing the parameters
Proceed as follows:
Find the desired parameter
Edit the value
Press the END soft key to close the configuration
editor
Press the SAVE soft key to save the changes
The control saves a change list of the last 20 changes
to the configuration data. To undo changes, select the
corresponding line and press the MORE FUNCTIONS and
CANCEL CHANGE soft keys.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
12
491