HEIDENHAIN TNC 620 User Manual page 38

1
Basic information | Control model, software and features
With the PROBING PL function, the control shows a help graphic
prior to aligning the 3D basic rotation in order to point out the
danger of collision during tilting (option 17).
Further information: "Determining a 3-D basic rotation",
Page 226
The FILTER soft key in the error window was renamed to
GROUPING. With this soft key, the control groups warnings and
error messages.
Further information: "GROUPING soft key", Page 103
The user interface of the Network settings window has
been changed. For network configuration, use the Network
Connections window.
Further information: "Ethernet interface ", Page 412
The control creates certificates for the OPC UA NC Server
(options 56 to 61) with a validity of five years.
Further information: "PKI Admin", Page 467
The input range of machine parameter displayPace (no. 101000)
has been extended. The minimum display step of the axes is
0.000001° or mm.
Further information: "General status display", Page 68
38
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022