HEROS functions | Window manager
Restore data
Caution: Data may be lost!
When you restore data (Restore function), any existing data will
be overwritten without a confirmation prompt. Existing data is not
automatically backed up by the control before running the restore
process. Power failures or other problems can interfere with the
data restore process. As a consequence, data may be irreversibly
damaged or deleted.
Before starting the data restore process, make a backup of the
existing data
To restore data:
Select NC/PLC Restore
Select the archive to be restored
Select the next step with the FORWARD soft key
The control generates a list of files for restoring.
Check the list. Deselect files if necessary.
Select the next step with the FORWARD soft key
Stop the control if required with the STOP NC SOFTWARE soft key
Extract the archive
The control restores the files.
Confirm with the OK soft key
The control restarts the NC software.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
NOTICE
10
401