HEIDENHAIN TNC 620 User Manual page 319

Pallets | Pallet management (option number 22)
Column Meaning
Location of the pallet
LOCATION
The entry MA indicates that there is a pallet or fixture
in the working space of the machine and can be
machined. Press the ENT key to enter MA. Press the
NO ENT key to remove the entry and thus suppress
machining.
Line locked
LOCK
Using an * you can exclude the line of the pallet table
from processing. Press the ENT key to identify the
line with the entry *. Press the NO ENT key to cancel
the lock. You can lock the execution for individual NC
programs, fixtures or entire pallets. Unlocked lines (e.g.
PGM) in a locked pallet are also not executed.
Number of the pallet preset
PALPRES
Execution status
W-STATUS
Machining method
METHOD
ID for mid-program startup
CTID
Clearance height in the linear axes X, Y, and Z
SP-X, SP-Y,
SP-Z
Clearance height in the rotary axes A, B, and C
SP-A, SP-B,
SP-C
Clearance height in the parallel axes U, V, and W
SP-U, SP-V,
SP-W
Comment
DOC
COUNT Number of operations
For rows of the PAL type: Current actual value for the
pallet counter nominal value defined in the TARGET
column.
For rows of the PGM type: Value indicating by how
much the pallet counter actual value will be increment-
ed after the execution of the NC program.
TARGET Total number of operations
Nominal value for the pallet counter in rows of the PAL
type
The control repeats the NC programs of this pallet until
the nominal value has been reached.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Field type
Optional field
If the column exists, the entry is
mandatory.
Optional field
Optional field
This entry is only required if pallet
presets are used.
Optional field
This entry is only required for tool-
oriented machining.
Optional field
This entry is only required for tool-
oriented machining.
Optional field
This entry is only required for tool-
oriented machining.
Optional field
Optional field
Optional field
Optional field
optional field
optional field
8
319