HEIDENHAIN TNC 620 User Manual page 428

10
Configuring the user administration
If you used the Remote Desktop Manager to establish
private connections before user administration was
activated, these connections are no longer available after
the activation of user administration.
Save your private connections before activating user
administration.
Further information: "Remote Desktop Manager (option
133)", Page 370
User administration is inactive in the control's factory default setting.
This status is called legacy mode.
User administration needs to be configured before you can use it.
Perform the following steps for configuration:
1 Calling and activating user administration
2 Creating a useradmin user
3 Setting up a database
4 Creating further users
Further information: "Creating further users", Page 437
Calling user administration
Call user administration as follows:
Press the DIADUR key to open the HEROS menu menu
Select the Settings menu item
Select the UserAdmin menu item
The control opens the User management window.
You can exit the User management window after each
configuration step.
If you exit the User management window directly after
having activated user administration, the control will
prompt you for a restart once.
428
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
HEROS functions | User administration