HEIDENHAIN TNC 620 User Manual page 258

6
Soft key
For blank in work space, the control depicts the BLK
FORM only schematically.
With BLK FORM CYLINDER, a cuboid is depicted as
the workpiece blank
With BLK FORM ROTATION, no workpiece blank is
depicted
258
Testing and running | Showing the workpiece blank in the working space (option 20)
Function
Switch on/off the monitoring
function
Display the machine preset
Set the principal axis values of the
active preset to 0 for the simula-
tion
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022