Additional Functions - HEIDENHAIN TNC 620 User Manual

3
To display the dependent files, set the machine
parameter dependentFiles (no. 122101) to MANUAL.

Additional functions

Protecting a file and canceling file protection
Place the cursor on the file you want to protect
Select the additional functions:
Press the MORE FUNCTIONS soft key
Activate file protection:
Press the PROTECT soft key
The file is tagged with the "protected" symbol.
Cancel file protection:
Press the UNPROTECT soft key
Selecting the editor
Place the cursor on the file you want to open
Select the additional functions:
Press the MORE FUNCTIONS soft key
Select the editor:
Press the SELECT EDITOR soft key
Mark the desired editor
Press the OK soft key
Connecting and removing USB storage devices
The control automatically detects connected USB devices with a
supported file system.
To remove a USB device, proceed as follows:
Move the cursor to the left-hand window
Press the MORE FUNCTIONS soft key
Remove the USB device
Further information: "USB devices on the control", Page 88
84
TEXT EDITOR for text files (e.g., .A or .TXT)
PROGRAM EDITOR for NC programs .H and .I
TABLE EDITOR for tables (e.g., .TAB or .T)
BPM EDITOR for pallet tables .P
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Fundamentals | File management