HEIDENHAIN TNC 620 User Manual page 415

HEROS functions | Ethernet interface
Interfaces tab
The control displays the available Ethernet interfaces on the
Interfaces tab.
The Interfaces tab contains the following information and settings:
Column Information or Setting
The control displays the name of the Ethernet
Name
interface. You can activate or deactivate the
connection by means of a switch.
The control displays the number of the network
Connection
connection.
The control displays the connection status of the
Connection
Ethernet interface.
status
The following connection statuses may be
displayed:
CONNECTED
Connected
DISCONNECTED
Connection separated
CONFIGURING
The IP address is being fetched from the
server
NOCARRIER
No cable present
You can execute the following functions:
Configura-
tion name
Select a profile for the Ethernet interface
In the factory default setting, two profiles are
available:
DHCP-LAN: Settings for the standard
interface for a standard company network
MachineNet: Settings for the second,
optional Ethernet interface; for
configuration of the machine network
Reconnect the Ethernet interface with
Reconnect
Edit the selected profile
Further information: "Network configuration
with Advanced Network Configuration",
Page 417
The control additionally offers the following functions:
Set standard values
The control resets all settings. The control restores the profiles
that are available in the factory default setting.
Configuration name
You can add, edit or remove profiles for the network connection.
The control exclusively supports the Ethernet connection type.
Further information: "Network configuration with Advanced
Network Configuration", Page 417
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
10
415