HEIDENHAIN TNC 620 User Manual page 421

HEROS functions | Ethernet interface
Settings for network drives
Have a network specialist configure the control.
You can connect network drives to the control. If the control is
connected to a network and the file shares are connected, the
control displays additional drives in the directory window of the file
management
In the Network drive area of the Mount Setup window, the control
shows a list of all defined network drives and the status of each
drive.
You can define any number of network drives, but only seven can be
connected at a time
In the Status Log area, the control shows status information and
error messages.
Open settings
To open the network drives settings:
Press the PGM MGT key
Press the NET soft key
Press the DEFINE NETWORK CONNECTN. soft
key
The control opens the Mount Setup window.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
10
421