HEIDENHAIN TNC 620 User Manual page 459

HEROS functions | User administration
Current User
With Current User, you can view the group rights of the currently
logged-on user in the HEROS menu.
In legacy mode, the user function user is automatically
logged on to the system during control startup. When
user administration is active, the user function user has
no effect.
Further information: "HEIDENHAIN function users",
Page 442
To call the Current User:
Press the DIADUR key to open the HEROS menu menu
Select the Settings menu item
Select the Current User menu icon
Temporarily changing the current user's rights
The user administration allows you to temporarily increase the
current user's rights by adding the rights of a user you selected.
Proceed as follows to temporarily increase a user's rights:
Call Current User
Press the Add rights soft key
Select the user
Enter the user's user name
Enter the selected user's password
The control temporarily increases the logged-on user's rights by
adding the rights of the user specified in Add rights.
You can temporarily enable the rights of oem function
users. For this purpose, enter the appropriate code
number or the password defined by the machine tool
builder.
You have the following options to remove the rights that have
temporarily been added:
Enter the code number 0
User logout
Press the Remove added rights soft key
Select the Remove added rights soft key as follows:
Call Current User
Select the Added rights tab
Press the Remove added rights soft key
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
10
459