HEIDENHAIN TNC 620 User Manual page 87

Fundamentals | File management
Step 3: Select a file
Press the SELECT TYPE soft key
Press the SHOW ALL soft key
Move the highlight to the desired file in the right
window
Press the SELECT soft key, or
Press the ENT key
The control opens the selected file in the
operating mode from which you called the file
manager.
If you enter the first letter of the file you are looking for in
the file manager, the cursor automatically jumps to the
first NC program with the same letter.
Filtering the display
To filter the displayed files:
Press the SELECT TYPE soft key
Press the soft key for the desired file type
Alternative:
Press the SHOW ALL soft key
The control displays all files in this folder.
Alternative:
Use wildcards, such as 4*.H
The control will show all files of file type .h whose
name starts with 4.
Alternative:
Enter the file name extension, e.g. *.H;*.D
The control will show all files of file type .h and .d.
Any display filter you have set will remain effective even after a
control restart,
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
3
87