HEIDENHAIN TNC 620 User Manual page 370

10
10.1 Remote Desktop Manager (option 133)
Introduction
Remote Desktop Manager enables you to display external computer
units on the control screen that are connected via Ethernet, and
to operate them via the control. You can also start programs
specifically under HEROS or display web pages of an external server.
HEIDENHAIN offers you the IPC 6641 as a Windows computer.
With the IPC 6641 Windows computer, you can start and operate
Windows-based applications directly from within the control.
The following connection options are available:
Windows Terminal Service (RemoteFX): Displays the desktop
of a remote Windows computer on the control
VNC: Connection to an external computer. Displays the desktop
of a remote Windows, Apple, or Unix computer on the control
Switch-off/restart of a computer: Configure automatic
shutdown of a Windows computer
World Wide Web: Available only to authorized specialists
SSH: Available only to authorized specialists
XDMCP: Available only to authorized specialists
User-defined connection: Available only to authorized
specialists
HEIDENHAIN assures a functioning connection between
HEROS 5 and the IPC 6641.
No guarantee is given for other combinations and
connections.
If you are using a TNC 620 with touch control, you can
replace some keystrokes with gestures.
Further information: "Operating the touchscreen",
Page 471
370
HEROS functions | Remote Desktop Manager (option 133)
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022