Incremental Jog Positioning - HEIDENHAIN TNC 620 User Manual
Setup, testing and running nc programs
Hide thumbs
Also See for TNC 620:
- User manual (616 pages) ,
- Operating instructions manual (64 pages) ,
- User manual (499 pages)
Table of Contents
Advertisement
5
Incremental jog positioning
With incremental jog positioning you can move a machine axis by a
preset distance.
The input range for the infeed is from 0.001 mm to 10 mm.
Operating mode: Press the Manual operation or
Electronic handwheel key
Shift the soft-key row
Select incremental jog positioning: Switch the
INCREMENT soft key to ON
Enter the infeed of the linear axes
Confirm with the CONFIRM VALUE soft key
Alternatively, confirm with the ENT key
Use the arrow keys to position the cursor on the
rotary axis
Enter the infeed of the rotary axes
Confirm with the CONFIRM VALUE soft key
Alternatively, confirm with the ENT key
Confirm with the OK soft key
The jog increment is active.
The control displays the set values in the upper
area of the screen.
Canceling incremental jog positioning
Switch INCREMENT soft key to OFF
If you are in the Jog increment menu, you can switch off
incremental jog positioning with the SWITCH OFF soft
key.
172
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Setup | Moving the machine axes
Advertisement
Table of Contents
