Test Run; Application - HEIDENHAIN TNC 620 User Manual

6
6.9

Test run

Application

The simulation of NC programs and program sections in Test
Run operating mode helps you to detect programming errors, as
well as collisions and interruptions during program run, before
the actual machining process. The motion simulation enables the
visual inspection of both the machining result and the machine
movements.
The control helps you detect the following problems:
Programming errors
Geometrical incompatibilities
Missing data
Impossible jumps
Material removal at rapid traverse
Machining errors
Usage of locked tools
Violation of the machine's working space
Collisions between the tool shank or tool holder and the
workpiece
The following functions and information are available:
Block-by-block simulation
Cancellation of test at any NC block
Hiding or skipping of NC blocks
Determined machining time
Additional status display
Graphic display
The graphical representation functions and the quality
of the represented model depend on the settings in
the Graphic settings MOD function.
Further information: "Graphic settings", Page 348
264
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Testing and running | Test run