HEIDENHAIN TNC 620 User Manual page 366

9
9.13 Diagnostic functions
Bus diagnosis
This function is protected by a code number.
Only use this function after consultation with your
machine tool builder.
The Diagnostic functions group of the Bus diagnosis MOD area
allows the machine tool builder to retrieve the bus system data.
TNCdiag
Only use this function after consultation with your
machine tool builder.
The control displays status and diagnostic information of
HEIDENHAIN components in the Diagnostic functions group of the
TNCdiag MOD area.
For more information, please refer to the TNCdiag
documentation.
Drive diagnosis
Only use this function after consultation with your
machine tool builder.
In the Diagnostic functions group of the Drive diagnosis MOD area,
the DriveDiag diagnosis tool is displayed.
With DriveDiag, the machine tool builder can retrieve information
about the hardware, software, and drive system in use.
Hardware configuration
Only use this function after consultation with your
machine tool builder.
In the Diagnostic functions group of the Hardware configuration
MOD area, the control displays the nominal and actual hardware
configurations in the HwViewer.
If the control detects a hardware change, it automatically opens the
error window. The soft keys displayed there allow you to open the
HwViewer.
The changed hardware component is color-highlighted.
HeROS information
In the Diagnostic functions group of the HeROS information MOD
area, the control displays details on the operating system.
Besides the information on the control type and the software version,
this MOD area also shows the current CPU and memory usage
values.
366
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
MOD functions | Diagnostic functions