HEROS functions | Setting up data interfaces
Switching the drive
You can switch the PC drive or the control drive that is shown in
TNCremo.
Switch the shown drive as follows:
Select the PC's file list or the control's file list
Select the Change folder/drive icon
TNCremo opens a pop-up window.
Select the desired drive in the selection menu
Select OK
TNCremo displays the selected drive.
Notes
When user administration is active, you can set up only secure
network connections via SSH. The control automatically disables
the LSV2 connections via the serial interfaces (COM1 and COM2)
and the network connections without user identification.
You can download the current version of the TNCremo software
from the HEIDENHAIN homepage.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
10
411