HEIDENHAIN TNC 620 User Manual page 427

HEROS functions | User administration
10.8 User administration
Introduction
Refer to your machine manual.
Some user administration areas are configured by the
machine tool builder.
If you want to use the user administration feature on
a control without HEIDENHAIN keyboard, you need to
connect an external alphabetic keyboard to the control.
User administration is inactive in the control's factory
default setting. This status is called legacy mode. In
legacy mode, the control's behavior is identical to that of
older software versions without user administration.
It is not mandatory that you use the user administration
feature, but it is essential for the implementation of an IT
security system.
User administration supports you in the following fields
of security, based on the requirements of the IEC 62443
series of standards:
Application security
Network security
Platform security
User administration enables you to define users with different
access rights.
The following options are available for saving your user data:
Local LDAP database
Using the user administration feature on one single control
Setting up a central LDAP server for more than one control
Exporting an LDAP server configuration file if the exported
database is to be used by more than one control
Further information: "Local LDAP database", Page 432
LDAP on remote computer
Importing an LDAP server configuration file
Further information: "LDAP on remote computer",
Page 433
Connection to Windows domain
Integrating the user administration feature on more than
one control
Using different roles on different controls
Further information: "Connection to a Windows domain",
Page 434
Parallel operation of Windows users and users from an
LDAP database is possible.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
10
427