Tool Radius R; Tool Table Fundamentals - HEIDENHAIN TNC 620 User Manual

4

Tool radius R

You can enter the tool radius R directly.

Tool table fundamentals

You can define and store up to 32 767 tools and their tool data in a
tool table.
You must use tool tables if:
you wish to use indexed tools such as stepped drills with more
than one length compensation value
Further information: "Indexed tool", Page 131
your machine has an automatic tool changer
you want to apply fine roughing with Cycle 22
Further information: User's Manual for Programming of
Machining Cycles
you want to work with Cycles 251 to 254
Further information: User's Manual for Programming of
Machining Cycles
Caution: Data may be lost!
Deleting line 0 from the tool table will destroy the structure of the
table. As a result, locked tools might no longer be recognized as
locked and, consequently, the search for a replacement tool will
not work, either. The problem cannot be solved by reinserting a
line 0. The original tool table will be permanently damaged!
Restore the tool table
Add a new line 0 to the defective tool table
Copy the defective tool table (e.g. toolcopy.t)
Delete the defective tool table (current tool.t)
Copy the copied tool table (toolcopy.t) as tool.t
Delete the copied tool table (toolcopy.t)
Contact HEIDENHAIN Service (NC helpline)
All table names must start with a letter. Please keep this
in mind when creating and managing additional tables.
You can select the table view with the Screen Layout
key. You can choose between a list view and a form view.
Other settings, such as SORT/ HIDE COLUMNS, can be
made after the file has been opened.
130
NOTICE
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Tools | Tool data