HEIDENHAIN TNC 620 User Manual page 76

3
Coordinate transformations
Soft key Meaning
Active transformations
Number of active datum table, active datum
number (#), comment from the active line of the
active datum number (DOC) from Cycle 7
Active datum shift (Cycle 7); the control displays
an active datum shift in up to 8 axes
Number of active datum table, active table
number (#), comment from the active line of the
active datum number (DOC)
Active shift in the working plane coordinate
system WPL-CS
Mirrored axes (Cycle 8)
Active angle of rotation (Cycle 10)
Active scaling factor/factors (Cycle 11) (Cycle 26);
the control displays an active scaling factor in up
to 6 axes.
Scaling datum
In the machine parameter
CfgDisplayCoordSys (no. 127501) the machine
manufacturer defines the coordinate system in which the
status display shows an active datum shift.
Further information: User's Manual for Programming of Machining
Cycles
Further information: User's Manuals for Klartext Programming and
ISO Programming
76
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Fundamentals | Status displays