HEIDENHAIN TNC 620 User Manual page 433

HEROS functions | User administration
LDAP on remote computer
Requirements
Before you can use the LDAP on remote computer function, the
following requirements must be met:
User administration is active
The useradmin user has been configured
An LDAP database has been set up in the company network
A server configuration file of an existing LDAP database must be
stored on the control or on a PC in the network
The PC with the existing configuration file is running.
The PC with the existing configuration file is accessible in the
network
Providing a server configuration file
Provide a server configuration file for an LDAP database as follows:
Call the user administration
Select the LDAP user database function
The control enables the dimmed area for editing the LDAP user
database.
Select the Local LDAP database function
Select the Export server configuration function
The control opens the Export LDAP configuration file window.
Enter the name for the server configuration file into the name
field
Save the file to the desired folder
The server configuration file was exported successfully.
Using the LDAP database on another computer
To use the LDAP on remote computer function, proceed as follows:
Call the user administration
Select the LDAP user database function
The control enables the dimmed area for editing the LDAP user
database.
Select the LDAP on remote computer function
Select the Import server configuration function
The control opens the Import LDAP configuration file window.
Select the existing configuration file
Select FILE
Press the APPLY soft key
The configuration file was imported.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
10
433