Setting The Screen Layout - HEIDENHAIN TNC 620 User Manual

3

Setting the screen layout

You select the screen layout yourself. In the Programming
operating mode, for example, you can have the control show the
NC program blocks in the left window while the right window
displays programming graphics. You could also display the program
structure in the right window instead, or display only the NC program
blocks in one large window. The available screen windows depend
on the selected operating mode.
Setting up the screen layout:
Press the screen layout key: The soft-key row
shows the available layout options
Further information: "Modes of operation",
Page 65
Select the desired screen layout with a soft key
60
Fundamentals | Visual display unit and operating panel
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022