Positioning W/ Manual Data Input - HEIDENHAIN TNC 620 User Manual

6

Positioning w/ Manual Data Input

Application
In order to skip NC blocks in the Positioning w/ Manual
Data Input operating mode, you need an alphabetic
keyboard.
In Positioning w/ Manual Data Input operating mode, you can
have the control skip NC blocks that have been marked corre-
spondingly. Proceed as follows:
Set the HIDE soft key to ON
The control skips the NC blocks.
Set the HIDE soft key to OFF
The control runs the NC blocks.
Procedure
To hide NC blocks in the Positioning w/ Manual Data Input
operating mode, proceed as follows:
Select the desired NC block
Press the / key on the alphabetic keyboard
The control inserts a slash (/).
To show NC blocks again in the Positioning w/ Manual Data
Input operating mode, proceed as follows:
Select the hidden NC block
Press the Backspace key
The control removes the slash (/).
262
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Testing and running | Skipping NC blocks