Functions In Touch Probe Cycles - HEIDENHAIN TNC 620 User Manual

Setup | Using a 3-D touch probe (option 17)

Functions in touch probe cycles

Soft keys that are used to select the probing direction or a probing
routine are displayed in the manual touch probe cycles. The soft
keys displayed vary depending on the respective cycle:
Soft key Function
Select the probing direction
Capture the actual position
Probe hole (inside circle) automatically
Probe stud (outside circle) automatically
Probe a model circle (center point of several
elements)
Select a paraxial probing direction for probing of
holes, studs and model circles
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
5
209