HEIDENHAIN TNC 620 User Manual page 419

HEROS functions | Ethernet interface
Ethernet tab
The Ethernet tab contains the following settings:
Setting Meaning
Here you can select the Ethernet interface.
Device
If you do not select an Ethernet interface, this
profile can be used for any Ethernet interface.
Selection by means of a selection window
Currently no function
Cloned MAC
address
Here you can define the maximum package size in
MTU
bytes.
Input: Automatic, 1...10000
Currently no function
Wake on LAN
Currently no function
Wake on LAN
password
Here you have to configure the settings for the
Link negotia-
Ethernet connection:
tion
Ignore
Retain the configurations already existing on
the device.
Automatic
The speed and duplex settings are configured
automatically for the connection.
Manual
Configure the speed and duplex settings for
the connection manually.
Selection by means of a selection window
Here you have to select the speed settings:
Speed
10 Mb/s
100 Mb/s
1 Gb/s
10 Gb/s
Only with selection Link negotiation Manual
Selection by means of a selection window
Here you have to select the duplex setting:
Duplex
Half
Full
Only with selection Link negotiation Manual
Selection by means of a selection window
802.1X Security tab
Currently no function
DCB tab
Currently no function
Proxy tab
Currently no function
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
10
419