11
11.1 Display unit and operation
Touchscreen
Refer to your machine manual.
This function must be enabled and adapted by the
machine manufacturer.
The touchscreen is distinguished by a black frame and the lack of
soft-key selection keys.
The TNC 620 has its operating panel integrated in the 19" screen.
1
Header
When the control is on, the screen displays the selected operat-
ing modes in the header.
2
Soft-key row for the machine tool builder
3
Soft-key row
The control shows further functions in a soft-key row. The
active soft-key row is shown as a blue bar.
4
Integrated operating panel
5
Setting the screen layout
6
Switchover between machine operating modes, programming
modes, and a third desktop
472
Operating the touchscreen | Display unit and operation
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
1
2
3
5
4
6