6
Shifting the sectional plane
The default setting of the sectional plane is selected so that it lies in
the working plane in the center of the workpiece blank and in the tool
axis on the top surface of the workpiece blank.
Proceed as follows to move the sectional plane:
Press the soft key for
shifting the sectional plane
The control displays the following soft keys:
Soft key
The position of the sectional planes is visible during shifting. The
shift remains active, even if you activate a new workpiece blank.
Resetting sectional planes
The shifted sectional plane also remains active for a new workpiece
blank. The sectional plan is automatically reset when the control is
restarted.
Proceed as follows to move the sectional plane to the default
position:
Press the soft key for
resetting the sectional planes soft key
254
Function
Shift the vertical sectional plane to
the right or left
Shift the vertical sectional plane
forward or backward
Shift the horizontal sectional plane
upwards or downwards
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Testing and running | Graphics (option 20)