HEIDENHAIN TNC 620 User Manual page 338

8
To move a line in the job list in Batch Process Manager:
Open the desired job list
Press the EDIT soft key
Place the cursor on the desired line (e.g.,
Program)
The control displays the selected line in blue.
Press the MOVE soft key
Press the TAG soft key
The control highlights the line in which the cursor
is positioned.
Place the cursor on the desired position.
When the cursor is placed at a suitable position,
the control shows the INSERT BEFORE and
INSERT AFTER soft keys.
Press the INSERT BEFORE soft key
The control inserts the line at the new position.
Press the GO BACK soft key
Press the EDIT soft key
338
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Pallets | Batch Process Manager (option 154)