HEIDENHAIN TNC 620 User Manual page 494
Setup, testing and running nc programs
Hide thumbs
Also See for TNC 620:
- User manual (616 pages) ,
- Operating instructions manual (64 pages) ,
- User manual (598 pages)
Table of Contents
Advertisement
12
Parameter settings
always minimum: Always display the feed rate
Display of spindle position in the position display
during closed loop: Display spindle position only if spindle is in position feedback control
during closed loop and M5: Display spindle position if spindle is in position feedback
control and with M5
during closed loop or M5 or tapping: Display spindle position if spindle is in position
feedback control, with M5 and in spindle jog operation
Lock the PRESET MANAGEMENT soft key
TRUE: Access to the preset table is locked
FALSE: The preset table can be accessed by soft key
Font size for program display
FONT_APPLICATION_SMALL
FONT_APPLICATION_MEDIUM
Sequence of icons in the display
[0] to [19]: depends on the activated options
Settings for display behavior: depends on the machine manufacturer
Entered by the machine manufacturer
Display setting for unchecked axes
ValuesRedColor: Red coloring of unchecked axes
SymbolNearAxisName: Caution symbol next to the axis letter
494
e.g., S_PULSE
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Tables and overviews | Machine-specific user parameters
Advertisement
Table of Contents
