HEIDENHAIN TNC 620 User Manual page 29

Basic information | Control model, software and features
User's Manual for Programming of Measuring Cycles
for Workpieces and Tools:
All functions provided by the touch-probe cycles are
described in the User's Manual for Programming of
Measuring Cycles for Workpieces and Tools. Please
contact HEIDENHAIN if you need this User's Manual.
ID: 1303431-xx
User's Manuals for Klartext Programming and ISO
Programming:
All information regarding NC programming (except
touch probe cycles and machining cycles) is provided in
the User's Manuals for Klartext Programming and ISO
Programming. Please contact HEIDENHAIN if you need
these User's Manuals.
ID for Klartext Programming: 1096883-xx
ID for ISO Programming: 1096887-xx
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
1
29