Available Tool Types - HEIDENHAIN TNC 620 User Manual

Tools | Tool management
Deleting marked tool data
Using this function you can simply delete tool data that you no
longer need.
Follow the steps outlined below for deleting:
In the tool management you use the arrow keys or mouse to
mark the tool data that you wish to delete
Press the DELETE MARKED TOOLS soft key
The control shows a pop-up window listing the tool data to be
deleted.
Press the EXECUTE soft key to start the deletion procedure
The control shows a pop-up window with the deletion status.
Terminate the delete process by pressing the END key or soft key
Caution: Data may be lost!
The DELETE MARKED TOOLS function permanently deletes the
tool data. The data is not automatically backed up by the control
(e.g., to a recycle bin) before being deleted. The data is irreversibly
deleted by this function.
Regularly back up important data to external drives
The tool data of tools still stored in the pocket table
cannot be deleted. The tools must be removed from the
magazine first.

Available tool types

In tool management, the control only displays the input
fields related to the selected tool type.
The tool management displays the various tool types with an icon.
The following tool types are available:
Icon
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
NOTICE
Tool type
Undefined,****
Milling cutter,MILL
Roughing cutter,MILL_R
Finishing cutter,MILL_F
Ball-nose cutter, BALL
Toroid cutter, TORUS
Drill,DRILL
Tool type number
99
0
9
10
22
23
1
155
4