HEIDENHAIN TNC 620 User Manual page 430

10
Deactivating user administration
If you deactivate user administration, the control saves all configured
users. Thus they will be available again when user administration is
reactivated.
If you want to delete the configured users upon deactivation, you
need to set this explicitly when deactivating user administration.
User administration can only be deactivated by the following
function users:
useradmin
OEM
SYS
Further information: "HEIDENHAIN function users", Page 442
Deactivate user administration as follows:
Log in as the appropriate function user
Call the user administration
Select User administration inactive
If necessary, check Delete existing user databases to delete
any configured users and user-specific directories
Press the APPLY soft key
Press the END soft key
The control opens the System reboot required
window.
Select Yes
The control triggers a restart.
Creating a useradmin function user
After user administration has been activated, create the useradmin
function user.
The useradmin user is comparable to the local administrator of a
Windows system.
Create the useradmin user as follows:
Select Password for useradmin
The control opens the Password for user 'useradmin' pop-up
window.
Set the password for the useradmin user
Select Set new password
The control shows the message Settings and password for
'useradmin' were changed.
430
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
HEROS functions | User administration