HEIDENHAIN TNC 620 User Manual page 455

HEROS functions | User administration
Switching or logging out users
Use the Switch-off HEROS menu item or the icon of the same name
at bottom right in the menu bar to open the Switch off and restart
window.
The control provides the following options:
Switch-off:
The control stops and ends all additional programs and
functions
The system is shut down
The control is switched off
Restart:
The control stops and ends all additional programs and
functions
The system is restarted
Log out:
The control ends all additional programs
The user is logged out
The login window appears
To continue, you need to log in a new user and
enter his password.
The NC program continues running under the
previously logged-on user.
Switch user:
The login window appears
The user is not logged out
You can close the login window with Cancel
without entering a password.
All additional programs and the NC programs
started by the logged-on user continue running.
Screensaver with lock
You can use the screensaver to lock the control. NC programs that
have already been started continue running during this period.
You need to enter a password to unlock the screensaver.
Further information: "Login to user administration",
Page 452
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
10
455