Tables and overviews | Specifications
User functions
Programming aids
Teach-In
Test graphics
Display modes
Programming graphics
Program-run graphics
Display modes
Machining time
Preset management
Returning to the contour
Datum tables
Touch probe cycles
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
■
Calculator
■
Color highlighting of syntax elements
Complete list of all current error messages
■
Context-sensitive help function
■
■
Graphic support for the programming of cycles
■
Comment and structure blocks in the NC program
■
Actual positions can be transferred directly to the NC program
x
Graphic simulation before a program run, even while another NC program
is being run
x
Plan view / projection in 3 planes / 3-D view / 3-D line graphics
x
Detail enlargement
■
In the Programming operating mode, the contours of the NC blocks are
drawn on screen while they are being entered (2-D pencil-trace graphics),
even while another NC program is being run
x
Graphic simulation of real-time machining in plan view / projection in 3
planes / 3-D view
■
Calculation of machining time in the Test Run operating mode
■
Display of the current machining time in the Program Run, Single Block
and Program Run, Full Sequence operating modes
■
For saving any datums
■
Block scan in any NC block in the NC program, returning the tool to the
calculated nominal position to continue machining
■
NC program interruption, contour departure and return
■
Multiple datum tables for storing workpiece-specific datums
x
Calibrating the touch probe
x
Compensation of workpiece misalignment, manual or automatic
x
Manual and automatic presetting
x
Automatic workpiece measurement
x
Tools can be measured automatically
12
513