HEIDENHAIN TNC 620 User Manual page 416

10
DHCP server tab
The machine manufacturer can use the DHCP server tab in the
control to configure a DHCP server in the machine network. Using
this server, the control can establish connections with other network
components of the machine network, e.g. with industrial computers.
Refer to your machine manual.
Ping/Routing tab
You can check the network connection on the Ping/Routing tab.
The Ping/Routing tab contains the following information and
settings:
Domain Information or Setting
Address:Port and Address:
Ping
You can enter the IP address of the computer and
possibly the port number for checking the network
connection.
Entry: Four numerical values separated by dots,
possibly a port number separated by a colon e.g.
10.7.113.10:22
As an alternative, you can enter the name of the
computer whose connection you want to check.
Starting and stopping the test
The control displays status information of the
Routing
operating system about the current routing for
network administrators.
SMB share tab
The SMB share tab is included only in connection with a VBox
programming station.
When the check box is active, the control releases areas or partitions
protected by a code number for the Explorer of the Windows PC
used, e.g. PLC. You can activate or deactivate the check box only by
using the machine manufacturer code number.
In the TNC VBox Control Panel, select a drive letter within the NC
share tab for displaying the selected partition and then connect
the drive with Connect. The host displays the partitions of the
programming station.
Further information: Programming station for milling
controls
You download the documentation together with the
programming station software.
416
Start button: starts the test
The control displays status information in the
ping field.
Stop button: stops the test
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
HEROS functions | Ethernet interface