HEIDENHAIN TNC 620 User Manual page 334

8
Opening Batch Process Manager
Refer to your machine manual.
In machine parameter standardEditor (no. 102902), your
machine tool builder specifies the standard editor used
by the control.
Programming operating mode
If the control does not open the pallet table (.p) in Batch Process
Manager as a job list:
Select the desired job list
Shift the soft-key row
Press the MORE FUNCTIONS soft key
Press the SELECT EDITOR soft key
The control opens the Select editor pop-up
window.
Select BPM-EDITOR
Confirm with the ENT key
Alternative: Press the OK soft key
The control opens the job list in Batch Process
Manager.
Program run, single block and Program run, full sequence
operating modes
If the control does not open the pallet table (.p) in Batch Process
Manager as a job list:
Press the Screen layout key
Press the BPM key
The control opens the job list in Batch Process
Manager.
Soft keys
The following soft keys are available:
Refer to your machine manual.
The machine tool builder can configure his own soft keys.
Soft key Function
Collapse or expand tree structure
Edit opened job list
Shows the soft keys INSERT BEFORE,
INSERT AFTER, and REMOVE
334
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Pallets | Batch Process Manager (option 154)